# Step 1: Connect the Soft Router
## Method 1 (Highly Recommended)
1. **Power Connection**:  
   Connect the device to a power source via the USB-C port.
2. **WAN Connection**:  
   Use an Ethernet cable to connect the **Ethernet jack** (e.g., LAN port of a router, wall network port) to the **WAN port** of the UrekaGo Device.  
   *Important: Ensure the Ethernet jack has an active internet connection!*
3. **Router Connection**:  
   Connect the **LAN port** of the UrekaGo Device to the **WAN port** of your router using an Ethernet cable.
4. **Device Connectivity**:  
   Connect your terminal devices (e.g., computers, smartphones) to the router.
---
## Method 2
1. **Power Connection**:  
   Connect the device to a power source via the USB-C port.
2. **WAN Connection**:  
   Use an Ethernet cable to connect the **Ethernet jack** to the **WAN port** of the UrekaGo Device.
3. **Terminal Device Connection**:  
   - **Wired**: Connect the **LAN port** of the UrekaGo Device to your terminal device via Ethernet.  
   - **Wireless**:  
     - Default WiFi SSID: `UrekaGo-5G`  
     - Default Password: `password`  
*Note: Method 1 is recommended due to the limited LAN ports and weaker WiFi signal of the UrekaGo Device.*
---
# Step 2: Use Residential IP
## Access the Control Panel
1. **Wait for Initialization**:  
   Allow 2 minutes for the UrekaGo Device to fully start after connection.
2. **Verify Connectivity**:  
   Ensure your PC is connected to UrekaGo and has internet access. If not, refer to the troubleshooting guide.
3. **Open Control Panel**:  
   - In your browser, enter: `http://192.168.18.1:9090/ui/yacd/`  
   - Input the following:  
     - **API Base URL**: `192.168.18.1:9090`  
     - **Secret**: `password`  
   - Click **Add** → Check the box below to log in.
---
## Configure Residential IP
1. **Select Residential IP**:  
   - Go to **Proxies** on the left panel.  
   - Under **GLOBAL**, choose your residential IP:  
     - `DIRECT`: Standard mode (no residential IP).  
     - Other options: Residential IPs. Click to activate.  
       *All connected devices will use the selected residential IP.*
2. **Refresh IP List**:  
   If no residential IPs appear, click **Update** (circled icon) under **Proxy Provider**.
---
# Q&A
### How to access the UrekaGo Device web management page?
1. Connect the UrekaGo Device to your PC.  
2. In your browser, enter: `http://192.168.18.1`  
3. Login with:  
   - Username: `root`  
   - Password: `password`  
---
### How to modify the WiFi SSID and password?
1. Access the UrekaGo web management page.  
2. Navigate: **Network → Wireless → Edit**  
3. Modify:  
   - **ESSID** (WiFi name) under *Interface Configuration - General Setup*.  
   - **Key** (password) under *Interface Configuration - Wireless Security*.  
4. Click **Save & Apply** to confirm changes.  
---
### How to reset to factory settings?
**Method 1**:  
Press and hold the external **Reset** button for 5+ seconds.  
**Method 2**:  
1. Access the web management page.  
2. Go to **System → Reset** and follow the prompts.